Flame Proof Motors Exporters in Ludhiana, Punjab, India

Flame Proof Motors

CG offers wide range of low voltage Flam eproof Squirrel Cage & Slip Ring electric motors for operation in hazardous and hostile environments, ranging from 0.37 kW to 355 kW. These Flame proof Motors are licensed by a European notified body (BASEEFA) and Indian notified body (ERTL/DGMS/DGFAS&LI).All relevant products fully comply with the requirements of the ATEX & CE Directives.

We also offer a complete range of Squirrel Cage Motors for Gas Group IIC. These motors are manufactured under most stringent quality control norms for IIC atmosphere and are duly tested at ERTL, Kolkata.

Scope

OUTPUT POWER	VOLTAGES	FRAME SIZE	STANDARD
0.37 kW to 325 kW	Up to 550 V	80 to 355	IEC, IS

Flame Proof Motor Ex 'D' (LV)

• Standard Motors are designed for foot mounting; other mountings are also available on request.

• Standard Levels of enclosure protection for motor and terminal box is IP55. With IP56,IP65 and IP66 available on request

• All Hazardous area motors (except for Gas Group IIC-available in TOP only) have terminal box on the RHS as standard. Top terminal box can be offered on request.

• Standard Paint shade is anti corrosive epoxy light grey 631 as per IS-5, others are also available on request

• The flame proof motors manufactured by CG are suitable for Temperature Class T4 as per IS 6381

Following accessories can be offered on request.

• Thermistor

• Space Heater

• Insulated Bearing ( Frame IEC 200 and above)

• Roller Bearing (Frame IEC 225 and above)

• Encoder Mounting arrangement

• MS/FRP Canopy

• Double Compression Cable Glands

FLAME PROOF MOTORS EX 'D' (LV)

Range	0.37 kW to 325 kW
Frame	IEC 80 to 355 in cast iron
Mounting	Foot / Flange / Face
Pole	2 to 8 Other on request
Frequncy	50 or 60 Hz
Ambient	-20 to + 65 ° C Others on request
Protection	IP 55 Other on request
Feature	Complying to BASEEFA/ATEX CE & ERTL/DGMS/DGFASLI
	Suitable for Gas Group I,IIA,IIB and IIC

FLAME PROOF MOTORS EX 'D' (LV)

OUTPUT POWER 0.37 kW to 325 kW IS 325

Three phase Induction motors-specification

　　 IS 325

Code of practice for installation and maintenance of induction motors

　　 IS 1231

Specification for Plame proof enclosure of electrical apparatus.

IS : 2148

Dimensions of Plange mounted A. C. Induction motors

IS : 2223

Classification of hazardous areas (other than mining) having flammable gases and vapours for electrical installations)

IS : 5572

Electrical apparatus explosive gas -atmospheres- Increased Safety 'e'

IS : 6381

Energy Efficient Induction Motors-Three phase Squirrel cage.

IS : 12615

IEC 600 79 Electrical Apparatus for explosive gas atmosphere

IEC 60079

Flame proof enclosure Ex 'd'

Part - 1

Increased safety enclosure Ex 'e'

Part - 7

Non sparking enclosure Ex 'n'